Flashing arduino (cli)
Install avrdude
avrdude is part of arduin sdk. It can also be installaed alone:
sudo apt-get install avrdudeusing avrdude
for AtMEga 2560 board
avrdude -p"atmega2560" -c"wiring" -P"/dev/ttyUSB0" -D -U"flash:w:[put-hex-file-path-here]:i"Cura
Can upload binary firmware: Preferences/Configure Cura/Printers/Upgrade firmware
Written on September 2, 2018, Last update on May 8, 2019
arduino
cli
linux
firmware
3dprinter