# DS215j (Synology) 💭
# Project 💭
revive it with a 2x1To Raid 1 setup - and expose it as nfs
# DS215j
- they are quite close
# spec ⮺
CPU: Marvell Armada 375, dual-core @ 800 MHz
RAM: 512 MB DDR3 (not expandable)
Architecture: ARM-based (low power, limited performance)
Drive bays: 2 × 3.5” SATA HDD (also supports 2.5” with adapter)
Max single volume: ~16 TB (practical limits depend on DSM version)
RAID support: SHR, RAID 0, RAID 1, JBOD
Read speed: up to ~111 MB/s
Write speed: up to ~87 MB/s
Network: 1 × Gigabit Ethernet
1 × USB 3.0
1 × USB 2.0
Power use: ~13.4 W active, ~5.3 W hibernation
Noise: ~18.5 dB(A)
Size: ~165 × 100 × 225 mm
Weight: ~0.88 kg
# Tailscale
Tailscale can run on both the Synology DS216j and DS215j. Both models have compatible ARM architectures, and Tailscale provides Synology packages for them.
- Open the Synology Package Center and search for Tailscale.
- The DS216j uses the armada38x architecture, while the DS215j uses armada375, so you must use the correct package for each model.
# nfs ⮺
- only v3
# ssh ⮺
# Pi Mutation ⮺ 💭
Written on May 13, 2026, Last update on May 14, 2026
nas
nfs
synology
hardware
project
